Ultrasonic Cutter ZO 91

Spesifikasi Ultrasonic Cutter ZO 91

Cutting with ultrasonic vibration 

When ultrasonic vibration is applied to a blade, the friction between the blade and the workpiece is reduced. As a result, less physical force needs to be applied to the cutter or knife when cutting the workpiece normally.

*If the blade is not capable of cutting the material by itself (without ultrasonic vibration), it will not be able to cut the material when ultrasonic vibration is applied.

Features

Unique "TAF" circuit keeps the output power stable and powerful.

Not likely other models, no need to keep holding down the operation switch on the handpiece switch (turns off automatically after 10 minutes operation).

High speed vibration, 40,000 cycle per second (40 kHz) assists smooth cutting with less pressure force.

Able to select Normal mode or High mode.

Main unit has handpiece holder. Handpiece settles safe while not in use.

CE compliance

Applicable material and thickness (reference)

Synthetic resin, Plastic. Epoxy putty, Paper, Cardboard,

Chemical fiber/ cloth, Polyester putty, 3D printed material, Silicone

Thickness: 3 mm maximum

The cutting experience described above may vary by the environment and hardness of the material.

For the material not listed above, please contact us, before you try.

power tools ultrasonic cutter